NETGEAR FSM726 - ProSafe Managed Switch, Руководство по установке

Страница: 120 / 156

700 Series Software Manual v2.1
6-28 Command Line Interface
FSM726(config)# system config-tftp ip <IP address>
Where
<IP address>
= the IP address of the TFTP server.
Config-tftp Path/File
The
config-tftp path/file
command lets you configure the path and the filename of the
configuration file to be loaded/saved.
Syntax
FSM726(config)# system config-tftp path/file <path&filename>
Where
<path&filename>
= the path and the filename of the file
IP
The
IP
command lets you set the IP address of the switch.
Syntax
FSM726(config)# system ip <IP address>
Where
<IP address>
= the IP address of the switch.
IP-Filter
The purpose of IP filtering is to prevent unauthorized personnel from gaining access to the switch.
This is accomplished by allowing only certain IP addresses to be able to access the management.
This command enables IP filtering on the switch. The No command will disable it.
Syntax
FSM726(config)# system ip-filter