NETGEAR FSM726 - ProSafe Managed Switch, Руководство по установке

Страница: 108 / 156

700 Series Software Manual v2.1
6-16 Command Line Interface
CoS (Class or Service)
Class of Service (CoS) is a way of managing traffic in a network by treating different types of
traffic with different levels of service priority. Higher priority traffic gets faster treatment during
times of switch congestion.
Syntax
FSM726(config-if)# cos <normal/high>
Where
<normal/high>
= the priority given to the port. When set to high, traffic from and destined for
this port will take priority over traffic from other ports.
Description
This command allows you to assign a name or description to a port.
syntax
FSM726(config-if)# description <description>
where
<description>
= the description you wish to give to this particular interface
Duplex
Syntax
FSM726(config-if)# duplex <duplex operation>
Where
<duplex operation>
= one of three modes. auto, full, or half.
Exit
This command takes you out of Interface Configuration Mode and back to Configuration Mode.
Syntax
FSM726(config-if)# exit