Factory Settings and Technical Specifications
75
AC1200 WiFi Range Extender
Factory Default Settings
To reset the extender to factory default settings, you can use either the
Reset
button on the
rear panel or log in to the extender and click a
RESET
button. For more information, see
Return the Extender to Its Factory Default Settings
The following table shows the factory default settings.
Table 3. Factory default settings
Factory Settings
Smart Setup
Enabled
WiFi
WiFi communication
Enabled
WiFi network name (SSID)
NETGEAR_EXT
Security
Disabled
Transmission speed
Auto
1
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.
Country/region
Varies by region
Operating mode
802.11ac, 802.11n, 802.11g, 802.11b
Data rate in the 2.4 GHz band
Up to 400 Mbps
Data rate in the 5 GHz band
Up to 867 Mbps
DHCP
Client enabled
