Network Settings
76
AirCard Smart Cradle
Your changes are saved.
If you changed the LAN IP address of the cradle, you are disconnected when this change
takes effect.
9.
To reconnect, close your browser, relaunch it, and log in to the cradle.
Specify the IP Addresses That the Cradle Assigns
By default, the cradle acts as a Dynamic Host Configuration Protocol (DHCP) server. The
cradle assigns IP, DNS server, and default gateway addresses to all computers connected to
the LAN. The assigned default gateway address is the LAN address of the cradle.
These addresses must be part of the same IP address subnet as the cradle’s LAN IP
address. Using the default addressing scheme, define a range between 192.168.100.2 and
192.168.100.254, although you can save part of the range for devices with fixed addresses.
To specify the pool of IP addresses that the cradle assigns:
1.
Launch a web browser from a computer or wireless device that is connected to the
Smart Cradle.
2.
In the address field of the browser, enter
http://netgear.cradle
or
http://192.168.100.1
.
A login prompt displays.
3.
Enter the cradle user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Setup > LAN Setup
.
5.
Make sure that the
Use Router as DHCP Server
check box is selected.
