manualshive.com logo in svg

NETGEAR D6220, Руководство пользователя, Страница: 74 / 266

Поделиться
Скачать
NETGEAR D6220 Скачать руководство пользователя страница 74

Set Up an IPv6 Fixed Internet Connection

To set up a fixed IPv6 Internet connection:

1.

Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.

2.

Enter http://www.routerlogin.net.

A login window opens.

3.

Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

4.

Select ADVANCED > Advanced Setup > IPv6.

The Basic Settings page displays.

5.

From the Internet Connection Type menu, select Fixed.

6.

Configure the fixed IPv6 addresses for the WAN connection:

•

IPv6 Address/Prefix Length. The IPv6 address and prefix length of the modem router’s WAN
interface.

•

Default IPv6 Gateway. The IPv6 address of the default IPv6 gateway for the modem router’s WAN
interface.

•

Primary DNS Server. The primary DNS server that resolves IPv6 domain name records for the
modem router.

•

Secondary DNS Server. The secondary DNS server that resolves IPv6 domain name records for
the modem router.

Manage the Internet Settings Manually

74

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Содержание D6220











































































































































































































































































Отзывы:

Нет отзывов