manualshive.com logo in svg

NETGEAR D6220, Руководство пользователя, Страница: 187 / 266

Поделиться
Скачать
NETGEAR D6220 Скачать руководство пользователя страница 187

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

4.

Select ADVANCED > Setup > LAN Setup.

5.

Make sure that the Use Router as DHCP Server check box is selected.

This check box is selected by default.

6.

Specify the range of IP addresses that the modem router assigns:

•

In the Starting IP Address field, enter the lowest number in the range.
This IP address must be in the same subnet as the modem router. By default, the starting IP address
is 192.168.0.2.

•

In the Ending IP Address field, enter the number at the end of the range of IP addresses.
This IP address must be in the same subnet as the modem router. By default, the ending IP address
is 192.168.0.254.

7.

Click the Apply button.

Your settings are saved.

Disable the Built-In DHCP Server

By default, the modem router functions as a DHCP server. The modem router assigns IP, DNS server, and
default gateway addresses to all devices connected to the LAN. The assigned default gateway address is
the LAN address of the modem router.

You can use another device on your network as the DHCP server or specify the network settings of all your
computers.

Manage the WAN and LAN Network Settings

187

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Содержание D6220











































































































































































































































































Отзывы:

Нет отзывов