manualshive.com logo in svg

NETGEAR D6220, Руководство пользователя, Страница: 199 / 266

Поделиться
Скачать
NETGEAR D6220 Скачать руководство пользователя страница 199

Use the Reset Button

CAUTION:

This process erases all settings that you configured in the modem router.

To reset the modem router to factory default settings:

1.

On the back of the modem router, locate the recessed Reset button.

2.

Using a straightened paper clip, press and hold the Reset button for at least five seconds.

3.

Release the Reset button.

The Power LED starts blinking amber and the configuration is reset to factory default settings. When
the reset is complete, the modem router reboots. This process takes about two minutes.

WARNING:

To avoid the risk of corrupting the firmware, do not interrupt the reset. For
example, if you are connected to the modem router’s web page, do not close
the browser, click a link, or load a new page. Do not turn off the modem router.
Wait until the modem router finishes restarting and the Power LED turns solid
green.

Erase the Settings

CAUTION:

This process erases all settings that you configured in the modem router.

To erase the settings:

1.

Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.

2.

Enter http://www.routerlogin.net.

A login window opens.

Manage the Modem Router and Monitor the Traffic

199

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Содержание D6220











































































































































































































































































Отзывы:

Нет отзывов