manualshive.com logo in svg

NETGEAR D6220, Руководство пользователя, Страница: 183 / 266

Поделиться
Скачать
NETGEAR D6220 Скачать руководство пользователя страница 183

these settings if you need a specific IP subnet that one or more devices on the network use, or if competing
subnets use the same IP scheme.

To change the LAN IP address settings:

1.

Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.

2.

Enter http://www.routerlogin.net.

A login window opens.

3.

Enter the modem router user name and password.

The user name is admin. The default password is password. The user name and password are
case-sensitive.

The BASIC Home page displays.

4.

Select ADVANCED > Setup > LAN Setup.

5.

In the IP Address field, enter the LAN IP address for the modem router.

6.

In the IP Subnet Mask, enter the LAN subnet mask for the modem router.

7.

Click the Apply button.

Your settings are saved.

If you changed the LAN IP address of the modem router, you are disconnected when the changes take
effect.

To reconnect, close your browser, relaunch it, and log in to the modem router at its new LAN IP address.

Manage the Router Information Protocol Settings

Router Information Protocol (RIP) lets the modem router exchange routing information with other routers.
By default, RIP is enabled in both directions (in and out) without a particular RIP version.

Manage the WAN and LAN Network Settings

183

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Содержание D6220











































































































































































































































































Отзывы:

Нет отзывов