manualshive.com logo in svg

NETGEAR D6220, Руководство пользователя, Страница: 265 / 266

Поделиться
Скачать
NETGEAR D6220 Скачать руководство пользователя страница 265

Table 4. D6220 modem router specifications (Continued)

Description

Feature

One RJ-45 port supporting 10BASE-T, 100BASE-TX, and 1000BASE-T

WAN

One RJ-11 asynchronous DSL (ADSL/VDSL) port

DSL

Maximum WiFi signal rate complies with the IEEE 802.11 standard.

Throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials
and construction, and network overhead, affect the data
throughput rate.

Note

WiFi

Auto-rate sensing

Radio data rates

•

IEEE 802.11 b/g/n 2.4 GHz-256QAM support

•

IEEE 802.11 a/n/ac 5.0 GHz

Data encoding standards

The modem router can support a maximum of 256 clients:

•

Maximum number of wired clients: 128

•

Maximum number of 2.4 GHz WiFi clients: 64

•

Maximum number of 5 GHz WiFi clients: 64

In a WiFi network, the number of clients is limited by the
amount of WiFi traffic that is generated by each client.

Note

Maximum number of
supported clients

•

2.4 GHz band

-

US: 2.412–2.462 GHz

-

Europe: 2.412–2.472 GHz

-

Australia: 2.412–2.472 GHz

-

Japan: 2.412–2.472 GHz

•

5 GHz band

-

US: 5.18–5.24 + 5.745–5.825 GHz

-

Europe: 5.18–5.24 GHz and DFS (5.25–5.35 + 5.50–5.70)

-

Australia: 5.18–5.24 + 5.745–5.825 GHz

-

Japan: 5.18–5.24 GHz

Operating frequency range

Supplemental Information

265

AC1200 WiFi VDSL/ADSL Modem Router Model D6220

Содержание D6220











































































































































































































































































Отзывы:

Нет отзывов