NETGEAR CGD24N, Руководство пользователя

Страница: 32 / 84

DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
2-12 Wireless Configuration
v1.0, August 2009
Connecting Additional Wireless Client Devices
You can add more WPS clients to your wireless network, or you can add a combination of WPS-
enabled clients and clients without WPS.
Adding Just WPS Clients
To add a wireless client device that is WPS-enabled, follow the procedures in “Using a WPS
Button to Add a WPS Client” on page 2-9 or “Using a PIN Entry to Add a WPS Client” on
page 2-11 .
Adding Both WPS and Non-WPS Clients
For non-WPS clients, you cannot use the WPS setup procedures to add them to the wireless
network. You must record, and then manually enter your security settings (see
“Manually
Configuring Your Wireless Settings and Security” on page 2-3 ).
To connect a combination of non-WPS enabled and WPS-Enabled clients to the gateway:
1.
Restore the gateway to its factory default settings (press the Restore Factory Settings button on
the rear panel of the gateway for 5 seconds).
When the factory settings are restored, all existing wireless clients are disassociated and
disconnected from the gateway.
2.
Configure the network name (SSID), select the WPA/PSK [TKIP] + WPA2/PSK[AES] radio
button on the Wireless Settings screen (see
“Manually Configuring Your Wireless Settings and
Security” on page 2-3 ). and click
Apply
. On the WPA/PSK + WPA2/PSK screen, select a
passphrase and click
Apply
. Record this information to add additional clients.
3.
For the non-WPS devices that you want to connect, open the networking utility and follow the
utility’s instructions to enter the security settings that you selected in Step 2 (the SSID, WPA/
PSK + WPA2/PSK security method, and passphrase).
4.
For the WPS devices that you want to connect, follow the procedure “Using a WPS Button to
Add a WPS Client” on page 2-9 or “Using a PIN Entry to Add a WPS Client” on page 2-11 .
Note:
If no WPS-capable client devices are located during the 2-minute timeframe, the
SSID will not be changed and no security will be implemented on the gateway.