NETGEAR CGD24N, Руководство пользователя

Страница: 30 / 84

DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
2-10 Wireless Configuration
v1.0, August 2009
3.
Either push the WPS button on the side of your gateway or click the onscreen button.The
screen displays the progress as the gateway tries to communicate with the client for 2 minutes:
While the gateway tries to establish a connection, you can stop the process by clicking
Cancel
.
4.
Go to the client wireless computer, and run a WPS configuration utility. Follow the utility’s
instructions to click a WPS button.
5.
Go back to the gateway screen and check the display:
•
Success
. A connection is established. The gateway has generated an SSID, implemented
WPA/WPA2 wireless security (including a PSK security password) on the gateway, and
has sent this configuration to the wireless client.
•
Failure
. No connection is detected, and no SSID or security settings are configured on the
gateway.
Note the new SSID and WPA/WPA2 password for the wireless network. You can view these
settings in the Wireless Settings screen. See
“Manually Configuring Your Wireless Settings
and Security” on page 2-3 .
To access the Internet from any computer connected to your gateway, launch a browser such as
Microsoft Internet Explorer or Mozilla Firefox. You should see the gateway’s Internet LED blink,
indicating communication to the ISP.
Using a PIN Entry to Add a WPS Client
Any wireless computer or wireless adapter that will connect to the gateway wirelessly is a client.
The client must support a WPS PIN, and must have a WPS configuration utility, such as the
NETGEAR Smart Wizard or Atheros Jumpstart.
Figure 2-5
Note:
By default, the gateway is configured with WEP security, which is incompatible
with WPS. If WEP is configured when you add a WPS client, the wireless security
changes to WPA-PSK [TIP] + WPA2-PSK [AES] when the client is added.