Advanced Settings
55
Wireless Cable Gateway CG3300CMR
Wireless Card Access List
By default, any wireless computer or device that is configured with the correct SSID is
allowed access to your wireless network. For increased security, allow only specific wireless
computers and devices to access the wireless network based on their MAC addresses.
To enable wireless card access:
1.
Click the
Set Up Access List
button display the Wireless Card Access List screen.
On this screen, you can restrict access to your network to specific devices based on their
MAC address.
2.
Select the
Turn Access Control On
check box to enable the restricting of wireless
computers and devices by their MAC addresses.
Note:
If Turn Access Control On is enabled and the Access Control List is
blank, then all wireless computers and devices are unable to
connect to your wireless network.
3.
For information about how to add wireless computers and devices to the Access Control
List, see
Wireless Client Access List Setup
on page 56.
