Connect to the Gateway
8
Wireless Cable Gateway CG3300CMR
You can use the LEDs to verify status and connections. The following table lists and
describes each LED and button on the front panel of the gateway.
LED
Description
Power
•
Green
. Power is supplied to the cable modem.
•
Blinking
. Power-on self-test.
•
Off
. No power.
Downstream
•
Green
. More than one channel is locked (channel bonding).
•
Amber
. One channel is locked (no channel bonding).
•
Blinking
. The unit is scanning for a downstream channel.
•
Off
. No downstream channel is locked.
Upstream
•
Green
. More than one channel is locked (channel bonding).
•
Amber
. One channel is locked (no channel bonding).
•
Blinking
. The unit is scanning for an upstream channel.
•
Off
. No upstream channel is locked.
Internet
•
Solid green
. The cable modem is online.
•
Blinking
. The cable modem is synchronizing with the CMTS of the cable provider.
•
Off
. The cable modem is offline.
LAN (Ethernet)
Green indicates 1,000 Mbps. Amber indicates 100/10 Mbps.
•
Solid
. An Ethernet device is connected and powered on.
•
Blinking
. Data is being transmitted or received on the Ethernet port.
•
Off
. No Ethernet device is detected on the Ethernet port.
Button
Description
WPS
Pressing this button opens a 2-minute window for the gateway to connect with other
WPS-enabled devices.
Note
: WPS has been disabled.
Wireless On/Off
Turn the wireless radio in the gateway on and off. The wireless radio is on by default. The
LED located below this button indicates if the wireless radio is on or off.
Note
: Wireless On/Off button has been disabled.