19
When you perform the
View Result
action you’ll see a view
that is similar to the
Test Performer
view, except that the ac-
tion selector only contains the action that allows you to view a
graph (Figure 33). If graph viewing is not possible, the action
selector will not be present at all. The results are viewed the
same way they were viewed with the
Test Performer
as speci-
fied in the previous chapter.
The filtering does not happen automatically, since it takes
some processing time and if you want to select multiple filters,
it would be a waste of time to filter the intermediate results. In
order to perform the filtering you must select the
Filter Results
action and tap the
Do Action
button. However, the
Filter Re-
sults
action is automatically selected for you when you change
any of the filters.
The filters can be combined together, for example if you want
to locate the
Drop Jump
action made in the previous chapter,
just select the
Subject
that made the jump using the subject
fil-
ter and select
Drop Jump
using the
Test
filter and tap on the
Do Action
button.
The
Group
and
Session
filters are useful in case the same sub-
ject belongs to multiple groups and/or has performed the
same tests within multiple sessions. Usually this is not the case
and most likely you only need to use the
Subject
and
Test
fil-
ters to locate the required test actions. After you have done
the filtering, the
Results
selector shows all
Test Actions
that
comply with the filtering rules. If no filtering rules are speci-
fied, the selector shows all
Test Actions
currently in the system.
The
Test
filter is most likely your first encounter with a multi-
page selector. When you open the selector it shows the
Select
Test
entry, list of tests and at the bottom there is
+Next Page
entry. When you click on the
+Next Page
entry, nothing seems
to happen and the selector closes itself. However, when you
reopen the selector you’ll see that the list of tests has changed
and now there is a
-Previous Page
entry at the bottom of the
list. Clicking on the
-Previous Page
entry returns you to the first
page. Most of the selectors and lists of
Powertimer SW-300
have the same paging system (multiple pages are also possi-
ble) so you should get familiar with it. Chapter 2.1. gives a de-
tailed explanation of selectors.
To view the actual results of a
Test Action
select the action
from the
Results
selector. When you select an action, the filters
are updated to show the
Group
,
Session
,
Subject
and
Test
the
action is related to. The action selector changes automatically
to
View Result
so tapping on the
Do Action
buttons allows you
to view the
Test Results
within the selected action. Figure 32
shows an example of this.
Figure 32
Selectors are updated to show the properties of the select-
ed
Test Action
Figure 33
Added a new session to
Session Manager
