16
17
tion is present in the
Test Performer
view. Selecting the action
and tapping
Do
removes the result that is shown in the
Results
selector. A confirmation message is shown before the result is
actually removed.
Ending a test
After the subject has performed the amount of jumps that was
specified before the test was started the test is considered
complete. If some results were removed in middle of the test,
the subject needs to re-jump those results. When a test is con-
sidered complete the
Measurement Unit
beeps, the message
shown in Figure 30 pops on the screen and the subject cannot
perform more jumps.
If the results are not satisfactory, the
Edit Results
button returns
to the normal view where the action selector will be visible.
The action selector can then be used to remove unsatisfactory
results so that they can be retried.
The test can also be ended before it is completed. If you want
to do that, just tap on the
Exit
button and the Powertimer que-
ries whether you want to save or discard the results of the test.
If the test does not contain any results, then the query is not
made. In any case, the Powertimer returns to the
Test Subject
Selector
view where you can select the next subject to perform
the current test, change test parameters or return to the
Test
Manager
by tapping on the
Exit
button.
Figure 30
Test is completed
