10
TESTING
3
3 TESTING
This chapter assumes that
Test Groups
and
Subjects
have been
created with the Powertimer Analyzer software and that they
have been transferred to the
Powertimer SW-300
. Also this as-
sumes that each subject that is tested has a valid birth date,
height and weight since tests cannot be started without those.
If subjects or groups do not exist or the subject data is not val-
id, chapter 6 explains how to create
Test Groups
and a
Sub-
jects
using
Powertimer SW-300
.
3.1 Test sessions
When the
Powertimer SW-300
is started the
Main View
is
shown. To start testing, you must first create a
Test Session.
Sessions
are used to group several tests results into one unit
for easier result browsing and have the properties defined in
chapter 1.1.
To start testing, tap on the
Sessions
button in the
Main View
.
This enters the
Session Manager
shown in Figure 14.
To create a new test session, select the
Add New Session
ac-
tion from the action selector of
Session Manager
and tap on
the
Do Action
button. This enters the
Edit Session
view shown
in Figure 15.
Figure 14
Session Manager
