For
Flow Control
, the default setting is
None
. If you are using flow control, set this option appropriately.
Note
:
You must
click the
Submit New Settings
button on the bottom of this page to save your settings
Remember, if you are only using one port, you can ignore the other port’s section.
Serial Port Jumper Configuration
Click the
Jumper Configuration
link on this page to view Port 0 and Port 1 jumper configuration and
pinout information.
Note:
To get back to the Serial section after viewing this page, click on the
Return to Setup Page
button
directly above the SB72EX diagram.
SB72EX User's Manual, 350030-001
Page 12
electronic components distributor
