NetBotz wallbotz 500, Руководство пользователя

Страница: 48 / 80

41
Configuring Network Settings
Encryption : Specify the type of encryption that
will be used on the wireless transmissions. You can
select
WEP , LEAP , or None .
If you select WEP, you must also specify
whether an ASCII or Hex WEP Key will be used,
as well as the WEP Key value.
If you select LEAP, you must also specify the
LEAP Username and Password that will be used.
Note: LEAP communications are supported only
when used with Cisco 1200 Series AP 12.01T1
wireless access points.
d.
Check the Enable Interface check box, and then
click OK to save these settings and continue.
8. Specify the DNS Settings.
To use DNS Settings that are provided by your DHCP
server, check the Use DHCP DNS Settings check box.
To specify DNS Settings for this appliance manually
uncheck the Use DHCP DNS Settings check box and
then provide the desired domain and DNS server
information.
9. Click Next to save your configuration settings. When the
save process is complete you can click Finish to close the
Serial Configuration Utility.
To test the appliance IP connection, start your web browser and
type the IP address that was assigned to the appliance into the
address field. Then, press
Enter . If the appliance is online and
properly configured the Basic View will be displayed in the
browser window.