c. Gently pull the cam handle straight toward you to remove the caching module from the NVRAM11
module.
Be sure to support the caching module as you remove it from the NVRAM11 module.
5. Install the caching module:
a. Align the edges of the caching module with the opening in the NVRAM11 module.
b. Gently push the caching module into the bay until the cam handle engages.
c. Rotate the cam handle until it locks into place.
6. Bring the replacement caching module online by using the
system controller slot module
insert
command as follows:
The following command prepares slot 6-1 on node1 for power-on, and displays a message that it is
powered on:
::> system controller slot module insert -node node1 -slot 6-1
Warning: NVMe module in slot 6-1 of the node localhost will be powered
on and initialized.
Do you want to continue? (y|n): `y`
The module has been successfully powered on, initialized and placed into
service.
7. Verify the slot status using the
system controller slot module show
command.
Make sure that command output reports status for the as
powered-on
and ready for operation.
8. Verify that the replacement caching module is online and recognized, and then visually confirm that the
amber attention LED is not lit:
sysconfig -av slot_number
If you replace the caching module with a caching module from a different vendor, the new
vendor name is displayed in the command output.
9. Return the failed part to NetApp, as described in the RMA instructions shipped with the kit. See the
page for further information.
Chassis
Replace the chassis - FAS9500
Before you begin
To replace the chassis, you must remove the power supplies, fans, controller modules,
I/O modules, DCPM modules, and USB LED module from the impaired chassis, remove
the impaired chassis from the equipment rack or system cabinet, install the replacement
chassis in its place, and then install the components into the replacement chassis.
22
