X.
Step
4
5
Copy the
varfs.tgz
file to the
TARGET
node by entering the proper command below:
6
Page 19 of 25
FAS2500 Model : Transfer the System Files using Non-Disruptive Procedure (cont.)
Action Description
(1)"Was the restore backup procedure successful? {y|n}"
--> This message is displayed only in some of the ONTAP versions.
IF 'restore backup' was success, continue with Section X on next page. If
not
success, follow disruptive method in Sec XI.
Issues? Call
NGS.
WAIT
for either of these message text to be displayed -
Do not answer it before executing step 4 & 5 below on the
PARTNER node.
Answer it in step 7-9 on next page after step 5 is completed.
S
T
O
P
(2)"The restore configuration has been copied
from the HA partner to this node,
would you like to use this restored copy
now? {y|n}"
Move console cable to the
PARTNER
node and login (
7-Mode
=
root
,
C-Mode
=
admin
). Engage end-user for
password.
C-Mode:
If at the
nodeshell
prompt, enter:
exit
to switch to
clustershell
first.
STOP!
For this step to work, the
PARTNER
node needs to have network connectivity (same subnet or through a gateway)
to the
TARGET
node (e0M). If the restore backup fails below, the disruptive method in Section XI must be used.
Was the restore backup procedure successful? {y|n}
The restore configuration has been copied
from the HA partner to this node,
would you like to use this restored copy
now? {y|n}
Boot Device Replacement for the FAS2500
For NetApp Authorized Service Engineers
This message is displayed only in
some of the ONTAP versions
STOP:
WAIT for either of these message text to
be displayed -
Do
not
answer it before
executing step 4 & 5 below on the
PARTNER node.
Answer it in step 7-9 on next page after
step 5 is completed
.
7-Mode
partner(takeover)>
restore_backup <target_node.netboot_IP(e0M).address>
Example:
fas2552cl2-rtp(takeover)*>
restore_backup 10.63.108.40
Start Restore Backup
mount_partner...success.
scp /partner/etc/varfs.tgz [email protected]:/var/home/root/success.
unmount /partnersuccess.
Finish restore backup
Cluster-Mode
Cluster::>
system node run -node local -command restore_backup
<target_node.netboot_IP(e0M).address>
Example:
cm2554c-rtp::>
system node run -node local -command restore_backup 10.61.83.35
Start Restore Backup
mount_partner...success.
scp /partner/etc/varfs.tgz [email protected]:/var/home/root/success.
unmount /partnersuccess.
Finish restore backup
