Netafim NLC-100SH, Руководство по установке и устранению неисправностей

Страница: 46 / 82

NLC ‐ 100SH Installation and troubleshooting
46
2 Use the item selectors to select item number
3. Alarm/Flow
and
you'll see the default setting for sensor setup,
Flow (Pulses)
:
3 Push the
ENTER
button to save your selection.
Now the NLC is ready to accept input from your flow sensor, but before you
can use it to anything meaningful you need to configure threshold values
and actions ‐ read more in the next section.
Configuring for Flow Sensor Input
In the previous section you enabled the NLC to accept flow sensor input ‐
now you need to configure what to do with it and this section walks you
through the relevant procedures.