Netafim NLC-100SH, Руководство по установке и устранению неисправностей

Страница: 72 / 82

NLC ‐ 100SH Installation and troubleshooting
72
Regardless of whether the station fails or turns out ok, you move on to
testing the next station in line by pushing the
ENTER
button.
Running the "Water Test"
The "water test" is a built ‐ in program that will activate all 100 station
identities in the system in turn. This way you can walk through the
landscape and ensure that all stations are actually pulling the valves open.
Running the test program
1 Turn the dial to
MANUAL
:
2 Push the
PROGRAM
button, locate the "Test" program (called "T") and
push the
ENTER
3 Now you can set the time each valve should be pulled open, and
which station you wish to start from.
-3mA / -3mA
There is a blown fuse on the connect board.
Reading Meaning
PAUSE/
RESUME
STOP MANUAL
OFF
RAIN OFF
RAIN ALARM STATUS
VIEW ALARMS
VIEW ET & RAIN
VIEW MOISTURE SENSOR
SETUP SENSORS
SOLENOID AMPS
ADVANCED
PROGRAM STATUS
WATER BUDGET / ET
START TIME
WATER DAYS
RUN TIME
PROGRAM
SET DATE & TIME
AUTO