Netafim NLC-100SH, Руководство по установке и устранению неисправностей

Страница: 70 / 82

NLC ‐ 100SH Installation and troubleshooting
70
2 Use the item selectors to select a station and push the
ENTER
button
to start the test.
If the station is ok, the display will look something like this:
In this case the station is pulling a current of 238mA to keep the valve open,
which is ok since this is typically in the 200 ‐ 400 mA range.
Note: The number before the slash is the current on the wire
before trying to activate the station ‐ if this is much more than
zero, there could be a leak somewhere.