MAN-0093 Rev 0 Oxygen Sensor
June 2008
Net Safety Monitoring Inc.
5
INTRODUCTION
The ST340 Oxygen sensor is designed specifically for use with any Millennium II series transmitters. This state
of the art “Smart” sensor is both versatile and reliable for fast, accurate and continuous monitoring of gases in
extreme environments.
THE PRODUCT
The sensor assembly consists of a factory sealed explosion proof housing rated for hazardous locations and a
replaceable sensor module. This sensor is designed to only operate with the Millennium II series Transmitters.
If the sensor is connected to any other model transmitters, it will not function and may result in the sensor being
damaged.
THE MANUAL
This manual has been designed to ensure the sensor / detector is set-up, operated and maintained properly. If you
encounter any problems, see the troubleshooting section of this manual.
Figure 1: Sensor Dimensional Drawing:
Measurements are in inches and millimeters (mm)
External Grounding Point
(119mm)
(66mm)
0.75” (19 mm)
1.25
31.75mm)
(
4.375” (111mm)
“
“
“
(74mm)
2.9”
