Net Insight Nimbra 300 Series, Руководство пользователя

Страница: 80 / 100

78
•
DTM Configuration Element Manager User’s Manual Nimbra OneSerie
©2006 Net Insight AB, All rights reserved
Editing or deleting host names
1. Navigate to the DTM|Host names page and click on the address for the
host to be edited or deleted. The Edit DTM Host names page, Figure 73,
will appear.
Figure 73. Editing DTM host names
1. Change the parameters as desired and click Apply or OK.
2. To delete a host, click the Delete button. The DTM|Host names page will
reappear with the host removed from the table.
Note:
The changes to a hostname will not affect channels that have
already been established. The hostname table is only consulted
when a channel is established.
Links
The Links page shows the DTM links that the node is connected to. The page
can be used to check if links to surrounding nodes have been properly
established. For each link id there should be two addresses; it’ s own node
address and one address to the remote node.
The link-table lists all the links that this node is attached to along with all other
nodes that are attached to these links. Each line in the table represents an
interface and the node that the interface is located in.
Each link starts with an id, which is equal to the id of a local interface. It lists
the other interface connected to that link before starting a new link with a new
id.