Net Insight Nimbra 300 Series, Руководство пользователя

Страница: 62 / 100

60
•
Control Network Element Manager User’s Manual Nimbra OneSerie
©2006 Net Insight AB, All rights reserved
3. Click Ok. The Routing configuration page, Figure 56, will appear, with
the changes made to the route reflected in the table.
4. If required, back up the configuration changes to the. Refer to chapter
Maintenance, section Configuration handling.
Note that assymetric routing may cause problem with snmp/telnet/ftp.
Deleting an IP route
To delete an IP route, follow the steps below:
1. Enter the Control Networks|IP Routing conf|Edit page according to the
previous section.
2. Click on the route to be deleted. The Edit IP Route page, Figure 58, will
appear.
3. Click on the Delete button.
4. The Control Networks|IP Routing conf page will reappear without the
removed IP route.
SNMP configuration
This chapter describes the SNMP (Simple Network Management Protocol)
configuration for the network element. It describes setting up of community
names, SNMPv3 user, and notification receivers.
1. Click on the Control Networks menu item. Then click on SNMP. The
SNMP configuration page, Figure 59, will appear.
Figure 59. SNMP configuration page