Ness Guardpost, Инструкция по установке и программированию

Страница: 8 / 36

8
ness Guardpost installation & Programming
After mounting the Guardpost,
plug in the AC plug pack for
24hours to fully charge the
onboard battery. To power-up the unit, turn the main
keyswitch clockwise to the ON
position.
The display will show the
firmware revision number.
When the unit is powered-up it
briefly allows entry into PROGRAM
mode. See page 15.
Guardpost then enters the previous operational mode.
If the unit was in ARMED, HOME, or HOME 2 mode, it will show the mode on
the display for 30 seconds. During this period triggers from the main PIR are
ignored, allowing it time to settle.
Then the unit resumes normal operation in the mode displayed. This process
will occur silently, without the usual arming sounds.
StArtUp
v2.5
Learn OFF
Your Guardpost may be supplied with 3 button or 4 button radio keys,
depending on the model.
The operation of the OFF, ON and PANIC buttons is the same for either
radio key.
The 4 button radio key has an additional AUX button which is designed
for use with the optional 100-099 AUX Receiver for home automation
functions such as lighting control or operating motorised garage doors.
rADIo KeyS
OFF
OFF
AUX
ON
ON
PANIC/
DURESS
PANIC/
DURESS
OPTIONAL AUX RECEIVER
Relay output to:
- Garage door controller
- Lighting
- Sprinkler systems
- Almost any electrical device