32
ness Guardpost installation & Programming
Guardpost Two-Way-Voice (TWV) monitoring via GSM allows an operator or
customer to listen and talk to Guardpost when alarm events happen.
Communications at the Guardpost is via the built-in microphone and speaker.
When an alarm event occurs and dialler report ends, or, when Two-Way-Voice is
enabled via SMS, the operator/customer can start two-way-voice monitoring to listen
to the area in which Guardpost is installed.
The operator can conduct a two way voice conversation with the premises. No user
intervention is required at the Guardpost and all communications is “hands-free”.
Two-Way-Voice monitoring can be initiated by one of three methods.
DiReCT START AFTeR evenT
Direct start of Two-Way-Voice monitoring can only be used if GSM audible reporting
is enabled (GSMAUD).
While the Guardpost voice message is annunciating, press (star) on your phone
to acknowledge the audible report. This will start Two-Way-Voice monitoring in listen
mode.
CALL bACK AFTeR evenT
You can always phone the Guardpost to start Two-Way-Voice monitoring after
a dialler report has ended in any GSM dialler mode (GSMCID, GSMSMS and
GSMAUD).
1
Call back the Guardpost after a dialler report has finished. Continuous beeps
will be heard indicating that Two-Way-Voice is ready to start.
2
Press on your phone to start Two-Way-Voice in listen mode.
CALL bACK enAbLeD by SmS
This method of initiating Two Way Voice requires an SMS request to be sent to the
Guardpost. In this example the Guardpost’s client account number is 1234.
1
Send this SMS to the Guardpost 1234,TWV Request
T must be uppercase.
(Shortcut. You can omit “WV Request” and send only 1234,T)
Guardpost will reply with Unit 1234: TWV Enabled
2
Once you receive the SMS reply you have 3 minutes to phone the Guardpost
and start two-way-voice communications.. Continuous beeps will be heard
indicating that Two-Way-Voice is ready to start.
3
Press on your phone to start Two-Way-Voice in listen mode.
TeLePhone CommAnDS
Press to start TWV.
Press to acknowledge an Audible alarm report.
TeLePhone CommAnDS DURinG A TWo-WAy-voiCe SeSSion.
Press
1
to talk
Press
2
to listen
Press
7
to reset/extend time. (Two Way Voice times out after 3 minutes.)
Press
3
to increase Guardpost microphone gain
Press
6
to decrease Guardpost microphone gain
Press
9
9
to hang up
RemoTe ARm/DiSARm DURinG TWo-WAy-voiCe
The Guardpost can be remotely armed/disarmed during a two way voice session.
Press
8
#
to arm
Press
0
#
to disarm
“Armed” or “Disarmed” will be heard then two-way-voice will continue in LISTEN mode.
An attempt to arm/disarm the panel when it is already armed or disarmed will result in
2 seconds silence then two-way-voice will continue in LISTEN mode.
tWo-WAy-VoICe MoNItorINg
Gsm
two Way
Voice
TWo-WAy-voiCe TiminG
• 3 minutes time out for call back
after dialler report has finished
• 90 seconds time out for phone
key commands after a call has
been connected.
• A Two Way Voice
communications session will
time out after 3 minutes.
• Multiple call back is allowed
within 90 seconds after a call
has been terminated using
“99”.
Содержание Guardpost
Страница 36: ......
