AC-5000 User Guide
33
When releasing the check box (
), each user is allowed for one authentication by
meal only, but when the user checks the box (
) he/she is allowed for several
authentications regardless of the existing authentication.
3.5.3. Function Key
When the user selects
◆
[ENT~]
[3. Application]
[3. Function Key] in the initial
screen
◆
, the following screen will appear.
▶
Initial setting: Identical with the screen at the left
Function key means the key including [F1]~[F4], [ENT] used to change the authentication
mode such as office start/office leave, etc. When the user presses the function key,
authentication mode is changed into the applicable mode. When it is not checked,
authentication mode is not changed even though the applicable key is pressed. Therefore,
it can be used with the checked other function key released in the event of using it as the
terminal exclusively for office start or office leave.
In case of releasing the check box of ‘6.Auto Sensing’, fingerprint sensor doesn’t respond
even if the user inputs his/her fingerprint on the sensor. In this case, be sure to input the
ID or card or fingerprint of the user.
3.5.4. Extended Key
When the user selects
◆
[ENT~]
[3. Application]
[4. Extended Key] in the initial
screen
◆
, the following screen will appear.
,
▶
Initial setting: Identical with the screen at the left
To use the Extended Key, press [1] key and then
check ‘1. Extended Key. The number of extended
keys can be set within the range of 1~40.
Extended Key is the function that extends the number as required up to 40 when any
additional authentication modes are necessary in addition to the basic function key
([F1]~[F4], [ENT]). In this case, the screen for selecting the extended key as below when
the user presses the F4 key. Select the applicable mode with [0]~[9] keys.
When the number of extended keys exceeds 10, select them by changing the page with
