AC-5000 User Guide
18
②
With the lid open, as shown in the figure below, connect pin No. 1 with pin No. 3, and
pin No. 2 with pin No. 4 of J404 connector respectively at backside.
<Figure 3-3>
③
Access the menu by pressing [F4(
←
)]key for 2 seconds or longer, fill Admin ID with
‘0’ on Verify Admin screen in <Figure 3-2>, and then press [ENT]key. The user can
then access the menu selected with the buzzer sounding “Brrrrrrp” .
▶
After modifying the configuration, don’t fail to get rid of the connected pin of J404
connector.
3.1.3. Modify setvalue
The following are the name and input method by input items.
<Figure 3-4>
▶
①
Input Box
In case of an item where the value is directly input like ‘1:1 Level’, user must delete
the existing value with [F4(
←
)] key when the focus is in the applicable item and
then input the new value using [0]~[9] key.
▶
②
Select Button
Input Box (with input focus)
①
①
Input Box (without input focus)
Select Button
②
Check Box
③
