AC-5000 User Guide
27
In the case of [3. Card Register]
When the user intends to register a card that has been
already registered
In case of [2. FP Register], when the user intends to
register again the fingerprint that has already been
registered.
※
If the user wants to register the same fingerprint
with other ID again, he/she must release ‘4. System
3. Fingerprint
Check SameFP’ function. This is,
however, not suitable for time & attendance, etc. as
the same fingerprints can be authenticated with
different IDs at the time of authentication.
In case of [2. FP Register] or [3. Card Register]
When the user attempted registration in excess of the
maximum number of registrations (10 each)
3.3.2. Delete
When the user selects
◆
[ENT~]
[1. User]
[2. Delete] in the initial screen
◆
, the
following screen will appear.
Input the user ID to be deleted, and then press
[ENT] key.
When inputting an unregistered ID, the failure
message will appear. When inputting a registered
ID, the success message will appear.
Deleting from the terminal doesn’t mean the deletion from the server. Therefore, it is
necessary to delete from the server in order to completely delete it.
Special care should be taken in case of deletion, since deletion is performed regardless of
User/Admin. Especially, the user registered in the terminal may not be restored after
deletion unless it is registered in the network server.
The following is the LCD information message that may appear during the process of
deletion;
