AC-5000 User Guide
23
3.3. User
Select “1. User” in the main menu, then the following screen will appear.
Press [1] key to register new user,
[2] key to delete user,
[3] key to modify user, and
[4] key to delete all users.
3.3. 1. Add
◆
Select [ENT~]
[1. User]
[1. Add]
◆
in the basic screen, then the following screen
will appear.
Input the user ID to be registered and then press
[ENT] key.
In this case, it automatically shows the ID that can
be registered on the screen, so the user can easily
perform registration. To modify the ID, press
[F4(
←
)] key and delete the existing value and
input the new value.
If the user inputs an already registered ID, a failure message will appear. The following
screen will appear if the ID is not yet registered.
The icon at left has the meaning as below;
Authentication type
Number of fingerprints registered (0~10)
Number of cards registered (0~10)
Whether or not password is registered
(
:Registered/
:Not registered)
As shown on the screen, the user can register by pressing [2] for fingerprint, [3] for card,
and [4] for password. Basically, it is registered in the name of the user. Using the keys [7]
and [8], the user can modify into the user and the admin. Once the registration is
completed, the user can press [ENT] to save it. The user must press [F4(
←
)] key to
cancel the registration and exit from the menu.
※
Only the user registered as admin can modify the operating environment of the
terminal, and Add/Modify/Delete the information of all the users saved in the terminal.
