AC-5000 User Guide
31
However, authentication is made by the server when the input
user ID or card is not registered in the terminal. (It doesn’t attempt
server authentication in case of 1:N fingerprint authentication)
3. Server Only
Although the user is registered in the terminal, authentication is
made through the server. Therefore, authentication is not made
unless the server is connected.
4. Terminal Only
Only the user registered in the terminal is authenticated. When
connected to the server, the authentication result will be
transmitted to the server on a real-time basis.
Flexible designation is allowed depending on the circumstance such as the number of
terminals connected to the server, the number of users authenticated, or the network
error, etc. It is recommended to use ‘2. Terminal/Server’ so that concurrent
authentications could be attempted when at least 10 terminals are connected to the
server or when network error frequently occurs in general.
3.5. Application
When the user selects ‘3. Application’ in the main menu, the following screen will appear.
Press the applicable key that represents the item to
be changed.
3.5.1. Application
When the user selects
◆
[ENT~]
[3. Application]
[1. Application] in the initial screen
◆
, the following screen will appear.
Select the operation type of the terminal by pressing
the applicable number key.
Press [ENT] key to apply the configuration while
[F4(
←
)] key to cancel it.
3.5.2. Time Schedule
3.5.2.1. Setting to Access / Time & Attendance
