NEOX User manual - Edition 03-2016
47
WASHING
For washing do not use steam jets/high pressure
cleaners. A strong jet of water can damage your e-
bike or result in a short circuit (fire hazard). The Neox
is an e-bike is easy to clean as there are no exposed
motors or batteries and has a very linear and rounded
structure.
For this reason it is advisable to adopt the procedures
described below.
1. Turn off the e-bike from the display and remove
the key from the switch.
2. Protect the monitor with a bag and seal it.
3. Remove the first layer of dirt with a gentle jet of
water.
4. Spray on a cleaning agent.
5. Gently rub with the help of a cloth or sponge and
after washing rinse with a jet of water
NOT AT
HIGH PRESSURE.
6. Remove the battery and blow inside the frame to
remove any standing water.
7. Remove the rear wheel and clean the shaft and
daisy chain attachment.
8. Grease the part with lithium grease, which is wa-
ter resistant.
VERY IMPORTANT!!!
Keep the connection zone between rear hub and wheel
(A) always lubricated with lithium grease.
A