NEOX User manual - Edition 03-2016
46
MAINTENANCE AND CARE
Regular and proper care of the bicycle is very important and
one of the conditions for validity of the warranty. Corrosion
caused by poor maintenance or damage caused by winter
weather conditions is not covered by the warranty. Protect
your Neox from any contact with corrosive substances by
using a spray wax or a similar protective product. Clean your
Neox after any contact with corrosive substances and reap-
ply the protection as described below. For washing do not
use steam jets/high pressure cleaners. A strong jet of water
can damage your Neox and/or result in a short circuit (fire
hazard).
PLEASE NOTE:
Proper maintenance extends the life of the bike and its components.
1. Perform regular cleaning and maintenance of your bike.
2. For washing use only a gentle water spray or a bucket of water and a sponge.
3. Use only clean fresh or desalinated water. Do not use salt water (e.g. seawater).
With many detergents and in the presence of low levels of dirt, it is sufficient to spray
the product and rinse after leaving it to act for the prescribed time. Then stubborn dirt
can be removed with a brush for radiators or similar, before rinsing.
Cleaning agents, lubricants and protective agents are chemical products. Some of
these products can damage your Neox e-bike. Only use products specifically designed
for bicycles. Make sure the products do not attack paint or rubber parts, plastic, metal,
etc. Consult your dealer. Strictly follow the indications of the manufacturers.
PLEASE NOTE:
AFTER THE FIRST 500 KM CARRY OUT AN INSPECTION OF ALL SCREWS OF THE
SINGLE ARM FORK ON THE NEOX E-BIKE. SUBSEQUENTLY CARRY OUT THIS IN-
SPECTION EVERY 1000 KM.