Neousys Nuvo-7501 Series, Руководство пользователя

Страница: 18 / 88

Nuvo-7501 Series
18
2.2 Front Panel I/O
The Nuvo-7501 I/O panel features two gigabit Ethernet ports, four USB3.1 Gen1
ports, one VGA connector, one DVI-D connector and four serial ports.
No. Item Description
1 Power button Use this button to turn on or shutdown the system.
2 Ethernet port
The Ethernet ports support 10/ 100/ 1000Mbps network
connections.
3 Reset button Use this button to manually reset the system.
4 DVI-D port
DVI-D output supports resolution up to 1920x1200 and is
compatible with other digital connections via an adapter.
5 VGA port VGA output supports resolution up to 1920x1200.
6
System status
LEDs
Three system LEDs, Power (PWR), Watchdog Timer (WDT),
and Hard Disk Drive (HDD).
7
4-pole 3.5mm
headphone/
speaker jack
3.5mm jack for speaker-out or microphone-input.
8 CMOS reset Use this button to manually reset the CMOS (BIOS).
9
USB 3.1 Gen1
port
USB 3.1 Gen1 port supports up to 5 Gbit/s data transfer
bandwidth.
10 COM port 1 & 2
COM ports 1 & 2 are software-configurable RS-232/422/485
ports. The ports are isolated on Nuvo-7505D system.
11 COM port 3 & 4
COM3 and COM4 are standard 9-wire RS-232 ports. The ports
are isolated on Nuvo-7505D system.
12
3-pin terminal
block (DC/
remote on/ off)
Compatible with DC power input from 8~35V, the terminal block
is also used for remote on/ off control.