Nuvo-7501 Series
71
4.1.4
SATA Configuration
The system SATA controller supports two (2) operating modes:
SATA
and
AHCI
modes.
AHCI
mode, which exposes SATA's advanced capabilities such as hot
swapping and native command queuing, is supported in several later version of
operating systems.
Recommended SATA controller mode settings:
If you’re using Windows Vista, Windows 7/ 8/ 10, or Linux kernel 2.6.19 or later,
you can select
AHCI
mode for better performance.
To set SATA controller mode:
1. When system boots up, press F2 to enter BIOS setup utility.
2. Go to
[Advanced]
>
[SATA and RST Configuration] > [SATA Mode
Selection]
.
3. Highlight
AHCI
and press Enter to bring up setting options.
4. Use t he up/ down arrow keys and go to
[SATA Device Type]
and highlight “Hard
Disk Drive” or “Solid State Drive” and press Enter to select your option.
5. Press F10 to “Exit Saving Changes”.
