Neousys Nuvo-7501 Series страница 79 Скачать руководство пользователя

Страница: 79 / 88

Nuvo-7501 Series

OS Support and Driver Installation

5.1

Operating System Compatibility

The system supports most operating system developed for Intel® x86 architecture.

The following list contains operating systems that have been tested by Neousys

Technology.



Microsoft Window 10 (x64)



Fedora 29**



Ubuntu 16.04.5 LTS and 18.04.0 LTS**

NOTE

For other Linux OS, Linux kernel should upgrade to 4.15.18.

* For Linux system, user may need to manually compile and install the driver for Intel

graphics or I210 GbE controller if the driver is not embedded in kernel. You can visit

Intel website for further information.

For distributions, graphics driver and RAID function may not be completely

implemented in its kernel. You may encounter restrictions when using these features,

such as triple independent display and RAID. For optimum operation, it is the users’

responsibility to manually check for new drivers and upgrades!

Neousys may remove or update operating system compatibility without prior notice.

Please contact us if your operating system of choice is not on the list.

Содержание Nuvo-7501 Series

























































































Результаты поиска

Содержание Nuvo-7501 Series

Отзывы:

Похожие инструкции для Nuvo-7501 Series

Бренды по названию

Популярные бренды

Neousys Nuvo-7501 Series, Руководство пользователя

Результаты поиска

Содержание Nuvo-7501 Series

Отзывы:

Похожие инструкции для Nuvo-7501 Series

Бренды по названию

Популярные бренды