Nuvo-4000 Series User’s Manual
Copyright © 2014 Neousys Technology Inc. All Right Reserved.
Page 34 of 76
Chapter 3 Getting Start
3.1 Install the SATA HDD/SSD
Nuvo-4000 offers two SATA ports located on the SBC via two 22-pin SATA connectors. A
dedicated bracket is included in its chassis assembly to hold two HDDs and connect them
to SATA ports. To install HDD(s) on SATA port(s), please follow the steps listed below.
1. Loose 4 screws on the front, back and right side of the chassis.
2. Simply open the chassis by pushing its side cover toward top, then remove the side
cover and the SBC is exposed.
