Nuvo-4000 Series User’s Manual
Copyright © 2014 Neousys Technology Inc. All Right Reserved.
Page 39 of 76
3.4 Install the PCI/PCIe Add-on Card
Nuvo-4000 provides PCI and PCIe slots on its backplane. Nuvo-4040 provides four PCI
slots, as Nuvo-4022 provides two PCI slots plus two PCI Express slots. Nuvo-4000
supports 5V, 33MHz/32-bit PCI bus and can accommodate PCI cards with a maximal
dimension of 205mm x 105mm (PCB size, excluding connector).
To install the PCI/PCIe add-on card, please follow the steps listed below.
1. Open the chassis by following step #1 and #2 in section 3.1. The PCI/PCIe slots are
exposed.
2. Install your add-on card into the PCI/PCIe slot. Make sure the “golden finger”
connector is firmly contacted with PCI/PCIe connector and the faceplate of the add-on
card is well inserted to the groove underneath.
3. Get the M3 PW-head screw from the accessory box. And use it to fix your PCI/PCIe
add-on card.
