Neousys Technology Nuvo-4022 Скачать руководство пользователя страница 15

Страница: 15 / 76

Nuvo-4000 Series User’s Manual

Page 15 of 76

2.2.6 DVI-I Connector

Nuvo-4000 supports triple independent display

outputs via a DVI-I and a DVI-D connector. The

DVI-I connector on the front panel offers DVI/HDMI

and VGA display outputs. The DVI/HDMI outputs

are directly driven by HM76 PCH and support up to

1920 x 1080 resolution. The VGA output is

implemented using an eDP-VGA converter and thus

you need to configure the output resolution (up to

1920 x 1080) according to the display device.

Please refer to section 4.1.5 for information about

configuring VGA output resolution in BIOS. A DVI-I

to DVI+VGA Y-cable is needed to have both VGA

and DVI/HDMI outputs.

The feature of triple independent display outputs is only available in Windows XP/7/8 with

corresponding graphics driver installed. Please refer to section 4.3 for information regarding

driver installation.

2.2.7 DVI-D Connector

Nuvo-4000 supports triple independent display

outputs via a DVI-I and a DVI-D connector. The

DVI-D connector on the front panel offers DVI/HDMI

signal output and supports up to 1920 x 1080

resolution. You shall need a DVI to HDMI cable

when connecting to a HDMI display device.

The feature of triple independent display outputs is only available in Windows XP/7/8 with

corresponding graphics driver installed. Please refer to section 4.3 for information regarding

driver installation.

Содержание Nuvo-4022







































































Результаты поиска

Содержание Nuvo-4022

Отзывы:

Neousys Technology Nuvo-4022, Руководство пользователя, Страница: 15 / 76

Результаты поиска

Содержание Nuvo-4022

Отзывы: