68
Linking
See Feeder Linking.
MaxiFeeder™
Feeder with high capacity feed tray (e.g. 2000 sheets A4 80gr).
Multifeed
The feature of an Inserting System in which more than one sheet is
taken from a Feeder.
OMR
Optical Mark Recognition
OMR code
definition
Standard 1-track OMR code definition. Specifies the amount of reading
marks used and the functionality linked to each of them (how each
should be interpreted).
Operator
The person operating an Inserting System.
Optical Mark
Recognition
(OMR)
Optical Mark Recognition is intended for reading and interpreting
printed codes. These codes are one or more black marks which are
read from a document. These marks give information to the Inserting
system about how to build-up and handle a set.
Reading error
Condition in which the system could not reliably read or interpret the
OMR reading marks from a sheet.
Reading marks
Marks added to documents containing finishing instructions that can
be identified by an OMR head and interpreted according to the used
OMR code definition.
Remote
diagnostics
The feature that makes it is possible to analyze a problem on an
Inserting System from a remote location.
Service engineer Technical engineer whose task it is to resolve problems with systems
in the field. Besides dealing with problems, service engineers are also
responsible for preventive maintenance.
Single fold
A single fold implies the document/set is folded once. The fold-position
is adjustable. This fold is illustrated in the picture below:
Stacker
Used as storage for filled envelopes.
Stop counter
Counter which sets the amount of envelopes to be filled. After filling
this amount of envelopes the system will stop (even during a clear).
Supervisor
Person who is responsible for the technical state of the machine.
Normally a supervisor has access to programming functions, which are
restricted for standard users.
Test run
A test run is intended to validate the settings of the Inserting System:
•
Inspect and adjust the stop position of the envelope.
•
Check the fold settings for one set.
•
Check whether the address is correctly positioned behind the
envelope window.
Thickness
detection
Checks the thickness of the document set. If the thickness is less or
more than the set value an error message is displayed.
Term
Description
