Neomatica ADM33, Руководство по эксплуатации

Страница: 15 / 18

«Neomatica» Wireless sensor-immobilizer ADM33, edition 1.1 dd 11.11.2019
15
5.
Command description
Command Answer Parameters Description
1 be be Command without parameters Switch to firmware update mode
2 ds ds Command without parameters Reset to the factory settings
3 rs rs Command without parameters Description of response
4 rb rb Command without parameters Description of response
5 wf wf Command without parameters Save settings
6 cp X cp X – password. Consists only of Arabic numerals Password change
7 сr X cr X – operation mode
0 – electromechanical relay;
1 – semiconductor switch (only output 1);
2 – semiconductor switch (only output 2);
3 – semiconductor switch (outputs 1 and 2).
Select immobilizer operation mode
8 br Х br Х – immobilizer status
0 – COM+NC (by default);
1 – COM+NO.
Select initial immobilizer status after
power switch on
9 ar Х ar Х – immobilizer status
0 – COM+NC;
1 – COM+NO (by default).
Select emergency status of immobilizer
10 ts ts Х – types of actions:
0 – do nothing;
Action to be performed at the absence of
connection with the tracker.