NeoClock
page 4
4. INSTALLING THE RECEIVER
1. Switch your system off and
unplug it
.
2. Connect the cable of the NeoClock receiver to the V24/RS232 serial
connector of your system. For the pin assignment, see
APPENDIX F
TECHNICAL FEATURES).
If you want to connect NeoClock to a computer equipped with a standard 9
points SUB-D male connector, you can plug directly NeoClock to this
computer.
3. Plug in and switch on your system again.
5. INSTALLING YOUR PROGRAM
First at all, your software MUST activate the RTS and DTR lines since they
power the NeoClock receiver.
Both lines must have a positive potential; they correspond respectively to the
pins 4 and 7 of the NeoClock cable connector.
As soon as these lines have a positive potential, the POWER LED (or left
LED in front view on the desk version) of the NeoClock receiver starts
flashing to indicate its good functioning.
Important : All five lines used by NeoClock MUST be connected to your
system (see
APPENDIX F
TECHNICAL FEATURES)
Содержание NeoClock
Страница 1: ...NEOL NeoClock User s guide Radio controlled clock NEOL S A Version 06 2001 E N G L I S H ...
Страница 2: ......
Страница 26: ...NeoClock page 22 NOTES ...
Страница 28: ...NeoClock page 24 ...