NeoClock
page 7
6.1.2 France Inter antenna system
POWER LED
(or left LED in front view on the desk version)
red blinking:
Indicates that the NeoClock receiver has not yet been able to decode the
time data coming from the atomic clock since it was powered.
Also indicates that the time data coming from the atomic clock could not
be decoded without error by the NeoClock receiver for the past 24 hours.
green blinking:
Indicates that the time data coming from the atomic clock could be
decoded without error. These data were sent to the connected PC through
the V24/RS232 connection and were also used to synchronise the
autonomous quartz clock of NeoClock.
RADIO SIGNAL LED
(or right LED in front view on the desk version)
red blinking:
Indicates a very low level of reception of the radio signal.
green blinking:
Indicates a medium level of reception of the radio signal.
green:
Indicates a good level of reception of the radio signal.
off:
Indicates that the quality of the radio signal has been too low for more than
one minute.
This LED switches on as soon as the signal is picked up. It switches off if
the reception is interrupted. If this happens, move the receiver until the
LED switches on again.
Содержание NeoClock
Страница 1: ...NEOL NeoClock User s guide Radio controlled clock NEOL S A Version 06 2001 E N G L I S H ...
Страница 2: ......
Страница 26: ...NeoClock page 22 NOTES ...
Страница 28: ...NeoClock page 24 ...