6
7
0
1
| I
NTR
O
D
U
C
TIO
N
0
1
| I
NTR
O
D
U
C
TIO
N
In addition to this user manual, further documents are enclo-
sed with your S-Pedelec. Please observe the instructions and
notes contained therein. There is currently a legal obligation to
wear a helmet when using an S-Pedelec.
I N T E N D E D U S E O F N E O D R I V E S
C O M P O N E N T S
The S-Pedelec with neodrives components, supplied by spe-
cialist dealers, is designed as a trekking or city bike for normal
person transport on public roads.
Settings and repairs to the S-Pedelec and to individual com-
ponents are considered intended use only if they are explained
and permitted in this user manual, in the user manual of the
S-Pedelec manufacturer, in the instructions of the component
manufacturers or in other documents enclosed with the pur-
chase of the S-Pedelec.
The manufacturer accepts no liability for damage caused neg-
ligently by misuse, improper maintenance, improper repairs or
improper use. It is the responsibility of the rider to check the
S-Pedelec as prescribed, to have any necessary work done on
it and to use it responsibly. This user manual describes exclu-
sively the use of the neodrives components attached to your
S-Pedelec and is state-of-the-art at the time of printing. The
manufacturer reserves the right to make changes resulting
from the further development of mechanics, software or legal
requirements.
01.1 | IMPORTANT NOTES
P L E A S E O B S E R V E !
The manufacturer regards the following cases as misuse of the
neodrives components attached to your S-Pedelec:
• Use of the drive system contrary to the instructions and
recommendations of this user manual
• Exceeding the technical performance limits defined in this
user manual
• Technical modifications to the neodrives components
• Changes to the software of the neodrives components
• Unauthorised mounting or unauthorised use of neodrives
components on bicycles or on any S-Pedelec other than the
one supplied to you
The manufacturer declines any liability for damage resulting
from misuse of the components. Before starting the journey,
familiarise yourself with the safety and hazard notices in the
individual chapters of these operating instructions and all
other enclosed documents.
01. 2 | PERMISSIBLE OPER ATING
CONDITIONS / LOCATIONS FOR USE
The neodrives components can be operated at temperatures
of between -10°C and 60°C → see page 14. In addition,
observe the information on permissible operating conditions
in the operating instructions of the S-Pedelec manufacturer.
Their restrictions of the permissible operating conditions (e.g.
maximum climbing capability, maximum permissible obstacle
height, maximum user weight) must also be observed when
using the S-Pedelec! Observe the safety and hazard notices in
the individual chapters of these operating instructions.
