Neodrives Z20 RS, Руководство пользователя

Страница: 13 / 26

24 25
0
3
|
ne
o
MMI
0
3
|
ne
o
MMI
T R I P M E N U I T E M
01.
Tap the Trip menu item in the main menu. This will take
you to sublevel 1, where the following menu items are
displayed:
Trip Distance
Time
kcal
02.
To reset the three values shown for distance, time and
kcal to "0", tap "Reset".
03.
To go back to the main menu, tap "Trip" at the top or
press the "Menu" or "Back" button.
04.
If you want to go straight back to the main display, press
the "Home" button.
I N S P E C T I O N M E N U
Tapping the "Inspection" menu item in the top level takes
you to this menu item. The following items are displayed: the
frame number, when the next inspection is due, how often the
battery has been charged, and the total distance the S-Pe-
delec motor has covered so far. The odometer information
cannot be reset to "0". The software versions of the individual
components and their IDs are also displayed here). You can
return to the top level of the menu by tapping either "Inspec-
tion" at the top or the "Back" button in the bottom left corner.
Or you can leave the menus completely by tapping the round
"Home" button in the middle at the bottom. This will take you
to the main display
→ siehe
Seite 22.
S E T T I N G S M E N U I T E M
Tap the "Settings" menu item in the main menu. This will
take you to sublevel 1 where the following menu items are
displayed:
Settings Touchscreen
Battery
Units
Language
Time & date
Update
A software update temporarily stored on the
neoMMI Z20 RS can be installed by tapping "Update". This
will be uploaded to the S-Pedelec once the display is ope-
ned.
01.
Tap the "Inspection" menu item in the main menu. This
will take you to sublevel 1, where the following menu
items are displayed:
Inspection Frame ID
Inspection
Use
Charge cycles
Odometer (this display cannot be reset
to "0")
Software versions: This menu item
shows you the firmware status of the
components
To go back to the main menu, tap "Inspection" at the top or
press the "Menu" or "Back" button.
02.
If you want to go straight back to the main display, press
the "Home" button.
You can see the firmware status of your components at a
glance.