NeoDen NeoDen10, Руководство пользователя

Страница: 38 / 64

38

Feeder type : there are pneumatic and electric feeders.

Retry time
：
for those expensive components,you can set less retry time to avoid wasting.

Feeding time: add feeding time for these components can’t be fed in right position during default feeding time.

Nozzle:
You can select one or several nozzles for the same feeder according to actual demand, once selected, they’ll be
automatically assigned to each feeder. Notice: for feeders near four corners, some nozzles can’t reach the edge
feeders,and the nozzle selection is limited. If you’re not sure which nozzle could reach the feeder, please click “Feeder
Test ” button under the nozzle selection part. It will pop out below, you can test which nozzle is available to pick up
component from this selected feeder. Details for each button:

Nozzle
：
Select the nozzle you want to test

Step Pick Test : click Step button after nozzles are selected→ the nozzle moves to the feeder→feeder cover opens →
the nozzle moves downwards to pick up component →photograph→ throw component. This could help the user to
check if the pick position or the pick height is correct. If pick fails, then please adjust parameters in feeder basic
information.

Pick Test
: after select the nozzle, click to do pick test, the head will move to feeder position and finish the pick up step
without any pause.

Recognition Tes t: After clicking Pick test, the component will be picked up. Then click Recognition test to check if
the component can be recognized correctly with the selected recognize method. If the component is not well
recognized , adjustment can be applied to solve the issue
。