NeoDen NeoDen10, Руководство пользователя

Страница: 16 / 64

16
Tracks width setting:Set correct PCB width value until the PCB can move smoothly
PCB Feed Test:Put PCB to “Tracks Section 1”,Click “forward”, PCB will move to “Tracks section 2” and stop at the
cylinder thimble position through the sensor,cylinder will raise the PCB, then thimble will go down, PCB feeding complete.
（
3
）
Long Tracks
Select the “Long Tracks”on PCB Forward Setting interface, first enter the number of track segments(each segment
corresponds to a file, the number of the file is corresponding to the number of the segment).Take 3-segment files as an
example, for first file, the number of segment is input 1;for second file,the number of segment is input 2;for third file, the
segment is input 3.
Secondly, set the board Forward Position. When editing long tracks file, only for first file, you need to set Forward
Position,for second file and third file, you do not need to set Forward Position.Finally,click Forward,the track will transport
PCB to the position of cylinder thimble. The blocking pin will block the PCB.The cylinder thimble will raise the PCB. The
blocking pin will return. The board feeding is completed.
The operation method of long tracks placement is as following
: (1)In the long track mode(placement of three sections),
three separate files need to be edited.(2)the naming requirements are as follows:add an underscore after the second file
name and the third file name(the underscore is English the corresponding number of the file, there can not be any
space in the file name, the file name is as follows:
When want to do mount of the finished working file,need choose the phase 1 file(e.g. long),then click mount.(the long
tracks also support mount 2 phases,then only need create 2 working files).
Working Step description of Long tracks mode in mounting: The long tracks sends feed signal to the front conveyor,
and feed PCB to cylinder thimble 1 position, cylinder will raise the PCB,then thimble 1 will go down,PCB feeding phase 1
is completed.After above placement is completed, the PCB in the waiting area is released, feed to cylinder thimble 2