3
neo-tools.com
KROK 4
KROK 5
Wymagane śruby: A, M8x12 mm, x12 C, nakrętka
M8 x12
Wymagane śruby: C M6x18 mm, x16
INSTRUCTION MANUAL
HEAVY-DUTY WORKBENCH
11-716
Read this manual completely before building or using the product. Keep the instructions for use. If you pass on the product, please provide the
instructions. Failure to comply with these instructions may result in injury and damage to the product or device. The manufacturer shall not be
liable for any damage caused by non -compliance with these instructions.
SAFETY
Attention! Beware of power surges
Never put the mains cable in the socket with wet hands and make sure the workbench does not come into contact with water.
Attention!
• Check the workbench for damage before any use.
• Keep children away from the device.
• Do not stand on the product. There’s a risk of injury.
• The device must not be retrofitted or rebuilt.
• Device changes exclude safe operation and can lead to personal and material damage.
• Keep children and persons who are mentally or physically impaired are away from the device. You can use the Device does not properly assess outgoing
hazards.
• This workbench is made for private use only and is suitable for indoor use only!
• Please check that all the parts listed are available before assembly.
• If parts are damaged or missing, please do not assemble the workbench. An improper construction can result in injuries.
• Build the workbench on a flat surface and make sure you have enough space to build it. Follow every step of the work and follow the order of the
assembly instructions.
• When assembling the parts, make sure you do not cut or squeeze. Prevent deformation of the parts by force.
• Keep children and pets away from building.
• Check all screws regularly and retract them if necessary.
• Do not change the device in any way.
• The maximum load weight shall be:1000lBS
PART LIST
NO.
Part name
quantity
1
MDF work table
1
2
main leg
2
3
Adjustable leg
4
4
Side connect bar
2
5
Top bar
2
6
Rear bar
1
7
Middle bar
1
8
foot
4
A
M 8×12 bolt
44
B
M 8 nut
44
B
M 6 bolt
16
Recommendation:
To avoid damage, It is better to install the workbench with two people.
Make sure you do not tighten the screws too tight as it may damage to the screw head.
EN
Содержание 11-716
Страница 12: ......